Special Steel for Fine blanking
Characteristic
This materials have higher spheroidizing rates of carbide than normal annealed materials,
and the carbide exist uniformly in the steel structure.
Manufacturable range
| Type of steel | Thickness(mm) | Width(mm) |
|---|---|---|
| S20C | 4.0~7.0 | 730~950 |
| S35C | 4.0~7.0 | 730~950 |
| S45C | 3.0~6.0 | 730~950 |
| SCr420 | 3.0~6.5 | 730~950 |
| SCM415 | 3.0~6.5 | 730~950 |
| SCM420 | 3.0~6.5 | 730~950 |
| SNCM220 | 4.0~6.5 | 730~950 |
Chemical Composition
| Chemical Composition(%) | ||||||||
|---|---|---|---|---|---|---|---|---|
| Type of steel | C | Si | Mn | P | S | Ni | Cr | MO |
| S20C | 0.18~0.23 | 0.15~0.35 | 0.30~0.60 | 0.020max | 0.014max | 0.25max | 0.20max | 一 |
| S35C | 0.33~0.38 | 0.15~0.35 | 0.60~0.90 | 0.020max | 0.014max | 0.25max | 0.20max | 一 |
| S45C | 0.42~0.48 | 0.15~0.35 | 0.60~0.90 | 0.020max | 0.014max | 0.25max | 0.20max | 一 |
| SCr420 | 0.18~0.23 | 0.15~0.35 | 0.60~0.85 | 0.020max | 0.014max | 0.25max | 0.90~1.20 | 一 |
| SCM415 | 0.13~0.18 | 0.15~0.35 | 0.60~0.85 | 0.020max | 0.014max | 0.25max | 0.90~1.20 | 0.15~0.30 |
| SCM420 | 0.18~0.23 | 0.15~0.35 | 0.60~0.85 | 0.020max | 0.014max | 0.25max | 0.90~1.20 | 0.15~0.30 |
| SNCM220 | 0.17~0.23 | 0.15~0.35 | 0.60~0.90 | 0.020max | 0.014max | 0.40~0.70 | 0.40~0.65 | 0.15~0.30 |
Mechanical properties
| Annealed Hardness (HRB) |
Hardening(HRB) | Tempering(HRC) | |||||
|---|---|---|---|---|---|---|---|
| Temperature (℃) |
Thickness(mm) | Temperature (℃) |
Thickness(mm) | ||||
| Type of steel | <6.0 | 6.0≦ | <6.0 | 6.0≦ | |||
| S20C | 82max | 一 | 一 | 一 | 一 | 一 | 一 |
| S35C | 88max | 840~890 water quenched |
46min | 46min | 150~200 air cooled |
43min | 43min |
| S45C | 91max | 820~870 water quenched |
53min | 53min | 150~200 air cooled |
50min | 50min |
| SCr420 | 93max | 830~880 oil quenched |
42min | 39min | 150~200 air cooled |
22min | 21min |
| SCM415 | 90max | 850~900 oil quenched |
30min | 24min | 150~200 air cooled |
24min | 22min |
| SCM420 | 90max | 850~900 oil quenched |
34min | 31min | 150~200 air cooled |
30min | 27min |
| SNCM220 | 88max | 850~900 oil quenched |
30min | 25min | 150~200 air cooled |
27min | 24min |
For more information on NIPPON STEEL materials, click the link below.
Click here for hot rolled catalog
Click here for cold rolled catalog
Notice
These material information in this page is based on NIPPON STEEL CORPORATION product catalog.
There are some cases maker do not accept the production depending on the production lot and specification.
Technical information in this website,while every reasonable effort was made to ensure the accuracy at the time of this publication, is general information relating to our products only and is not meant as any warranty,expressed or implied.
Such technical information does not guarantee that any of our products are suitable for your particular application or purpose. Use of any information contained in this website shall be at user's risk. Any information in this website is subject to change without prior notice. Please contact our company for up-dated information.
Please feel free to contact us
ZIP: 559-0032
5-26, 5-Chome, Nankominami, Suminoe-ku, Osaka, JAPAN
